| Part Number : NAS5315E08P3 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-529-3701 (5305015293701) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-529-3701 (015293701) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS5315E08P3, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015293701, part number NAS5315E08P3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS5315E08P3 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-529-3701 (5305015293701) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 015293701 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS5315E08P3, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015293701, part number NAS5315E08P3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-529-3701 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015293701 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS5315E08P3 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| FEAT | Special Features | THIS SCREW IS INTENDED FOR APPLICATIONS WHICH REQUIRE THE SIX LOBE RECESS; HAS UNDRILLED SHANK |
| AASK | Head Style | FLAT COUNTERSUNK |
| AHYM | Nominal Thread Diameter | 0.164 INCHES |
| AGAV | End Item Identification | MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL) |
| AASB | Fastener Length | 0.464 INCHES NOMINAL |
| AASA | Thread Length | 0.260 INCHES NOMINAL |
| AASL | Head Diameter | 0.332 INCHES NOMINAL |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| MDCL | Material Document And Classification | AMS5731 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS5732 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS5737 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| CXCY | Part Name Assigned By Controlling Agency | SCREW, SHEAR, FLAT 100 DEG HEAD, CLOSE TOLERANCE, SHORT THREAD, SIX LOBE RECESS, 95 KSI FSU; INAVY: SCREW, SHEAR |
| AAJF | Thread Direction | RIGHT-HAND |
| ABQZ | Internal Drive Style | TORX |
| STDC | Surface Treatment Document And Classification | AMS-QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUJ | Spline Major Diameter | 0.155 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJC |
| MATT | Material | IRON ALLOY 660 OVERALL |
| CQBC | Minimum Tensile Strength | 2240 POUNDS PER SQUARE INCH |
| ANEE | Grip Length | 0.188 INCHES NOMINAL |
| AAJD | Thread Class | 3A |
| CMLP | Thread Quantity Per Inch | 32 |
| CRSQ | Countersink Angle | 100.0 DEGREES NOMINAL |
| AAUR | Grip Diameter | 0.163 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
