| Part Number : NAS1801-3-55 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-533-0662 (5305015330662) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 01-533-0662 (015330662) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: NAS1801355 | |||
Thank you for taking an interest in part number NAS1801-3-55, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015330662, part number NAS1801-3-55 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1801-3-55 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-533-0662 (5305015330662) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 015330662 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1801-3-55, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015330662, part number NAS1801-3-55 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-533-0662 Item PartTypeName: SCREW,MACHINE | 5305 | 015330662 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1801-3-55 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAUB | HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 3 |
| AATB | WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE |
| AASA | THREAD LENGTH | 3.420 INCHES MINIMUM AND 3.499 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,HEX HEAD,CRUCIFORM RECESS,FULL THREAD |
| AASU | HEAD HEIGHT | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE |
| AASB | FASTENER LENGTH | 3.421 INCHES MINIMUM AND 3.468 INCHES MAXIMUM |
| CYBG | HEAD HOLE CONFIGURATION STYLE | HEXAGON FLATS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
