| Part Number : NAS7502-15 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-533-0878 (5305015330878) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-533-0878 (015330878) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: NAS750215 | |||
Thank you for taking an interest in part number NAS7502-15, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015330878, part number NAS7502-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS7502-15 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-533-0878 (5305015330878) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 015330878 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS7502-15, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015330878, part number NAS7502-15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-533-0878 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015330878 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS7502-15 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| CMLP | Thread Quantity Per Inch | 32 |
| MATT | Material | STEEL CORROSION RESISTING OVERALL |
| CXCY | Part Name Assigned By Controlling Agency | BOLT,100 DEG HEAD,CRUCIFORM RECESS, CLOSE TOLERANCE |
| AASA | Thread Length | 0.323 INCHES NOMINAL |
| FEAT | Special Features | MATERIAL: CRES-A286 (UNS S66286). UNDRILLED SHANK, PLATED, NONLOCKING. |
| ABQZ | Internal Drive Style | CROSS RECESS TYPE III |
| AASL | Head Diameter | 0.331 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJC |
| AAJF | Thread Direction | RIGHT-HAND |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| AASB | Fastener Length | 1.246 INCHES MINIMUM AND 1.276 INCHES MAXIMUM |
| AGAV | End Item Identification | C130 AMP CMB |
| ANEE | Grip Length | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| AHYM | Nominal Thread Diameter | 0.164 INCHES |
| STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | Grip Diameter | 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MDCL | Material Document And Classification | AMS5731 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR AMS5732 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR AMS5737 ASSN STD 3RD MATERIAL RESPONSE OVERALL OR AMS5853 ASSN STD 4TH MATERIAL RESPONSE OVERALL |
| AAJD | Thread Class | 3A |
| MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
