| Part Number : NAS1580C3R10 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-538-7833 (5305015387833) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-538-7833 (015387833) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1580C3R10, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015387833, part number NAS1580C3R10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1580C3R10 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-538-7833 (5305015387833) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 015387833 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1580C3R10, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015387833, part number NAS1580C3R10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-538-7833 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015387833 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1580C3R10 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| AAWB | Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AASK | Head Style | FLAT COUNTERSUNK |
| CMLP | Thread Quantity Per Inch | 32 |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 0.862 INCHES MINIMUM FIRST HOLE AND 0.882 INCHES MAXIMUM FIRST HOLE |
| AASA | Thread Length | 0.363 INCHES NOMINAL |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| AASB | Fastener Length | 0.973 INCHES MINIMUM AND 1.003 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
| ANEE | Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNJF |
| ABQZ | Internal Drive Style | TORQUE-SET RIBBED |
| AAJF | Thread Direction | RIGHT-HAND |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| MATT | Material | IRON ALLOY 660 OVERALL |
| AAUR | Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
