| Part Number : NAS7504U5 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-545-5809 (5305015455809) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-545-5809 (015455809) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS7504U5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015455809, part number NAS7504U5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS7504U5 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-545-5809 (5305015455809) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 015455809 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS7504U5, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015455809, part number NAS7504U5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-545-5809 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015455809 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS7504U5 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | III END ITEM IDENTIFICATION | RQ-4A |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG HEAD, CRUCIFORM RECESS, CLOSE TOLERANCE, A2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD 1ST MATERIAL RESPONSE OR AMS5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS5737 ASSN STD 1ST MATERIAL RESPONSE OR AMS5738 ASSN STD 1ST MATERIAL RESPONSE OVERALL |
| ANEE | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.667 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.370 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
