| Part Number : NA0067A060026 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-579-5360 (5305015795360) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 01-579-5360 (015795360) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NA0067A060026, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015795360, part number NA0067A060026 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NA0067A060026 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-579-5360 (5305015795360) | |||
| Item Name : Screw Machine | CAGE Code : 80205 | ||
| NIIN : 015795360 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NA0067A060026, that of which is listed with the description Screw Machine; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305015795360, part number NA0067A060026 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-579-5360 Item PartTypeName: SCREW,MACHINE | 5305 | 015795360 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NA0067A060026 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQQR | THREAD PITCH IN MILLIMETERS | 1.0 |
| AASU | HEAD HEIGHT | 3.2 MILLIMETERS MINIMUM AND 3.5 MILLIMETERS MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 6.0 MILLIMETERS |
| CQBC | MINIMUM TENSILE STRENGTH | 1100 MEGAPASCALS |
| THSD | THREAD SERIES DESIGNATOR | MJ |
| AASA | THREAD LENGTH | 26.0 MILLIMETERS NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AATB | WIDTH BETWEEN FLATS | 9.7 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AGAV | III END ITEM IDENTIFICATION | NSN 2320-01-565-3428 CHASSIS, TRUCK |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBL | THREAD SURFACE FINISH | 0.8 MICROMETERS |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, DUAL, WRENCHING, HEX HEAD/OFFSET CRUCIFORM, A286 CRES, FULL THREAD, 1100 MPA-METRIC |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | A286 ASSN STD SINGLE MATERIAL RESPONSE |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | 0.8 MICROMETERS |
| CYBK | SHANK SURFACE FINISH | 0.8 MICROMETERS |
| AASB | FASTENER LENGTH | 9.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE SET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
