| Part Number : NAS1580C6T8 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-607-2093 (5305016072093) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-607-2093 (016072093) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1580C6T8, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305016072093, part number NAS1580C6T8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1580C6T8 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-607-2093 (5305016072093) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 016072093 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1580C6T8, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305016072093, part number NAS1580C6T8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-607-2093 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016072093 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1580C6T8 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.594 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.7170 INCHES MINIMUM AND 0.7604 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.167 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 0.49 INCHES MINIMUM AND 0.51 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 14000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG FLUSH HEAD |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | A-286 CRES PER AMS5731,AMS7532 OR AMS5737 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
