| Part Number : NAS1153E3DP | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-646-9774 (5305016469774) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-646-9774 (016469774) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1153E3DP, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305016469774, part number NAS1153E3DP is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1153E3DP | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-646-9774 (5305016469774) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 016469774 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1153E3DP, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305016469774, part number NAS1153E3DP is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-646-9774 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016469774 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1153E3DP | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.276 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.449 INCHES MINIMUM AND 0.479 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM ALL HOLES |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED |
| AHYM | NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE II, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
