| Part Number : NAS1158E20 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5305-01-647-7018 (5305016477018) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 01-647-7018 (016477018) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1158E20, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305016477018, part number NAS1158E20 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1158E20 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5305-01-647-7018 (5305016477018) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80205 | ||
| NIIN : 016477018 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1158E20, that of which is listed with the description Screw Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5305016477018, part number NAS1158E20 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-647-7018 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016477018 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1158E20 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AASK | Head Style | FLAT COUNTERSUNK |
| AHYM | Nominal Thread Diameter | 0.5000 INCHES |
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 1.58 INCHES NOMINAL ALL HOLES |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| CQBC | Minimum Tensile Strength | 17460 POUNDS PER SQUARE INCH |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASA | Thread Length | 0.453 INCHES NOMINAL |
| AAWB | Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES |
| MATT | Material | IRON ALLOY 660 OVERALL |
| ABQJ | Point Style | FLAT |
| AASB | Fastener Length | 1.703 INCHES NOMINAL |
| AASL | Head Diameter | 0.959 INCHES MINIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| CMLP | Thread Quantity Per Inch | 20 |
| THSD | Thread Series Designator | UNJF |
| STDC | Surface Treatment Document And Classification | QQ-P-35 TYPE II OR VIII FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | Material Document And Classification | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ANEE | Grip Length | 1.250 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CXCY | Part Name Assigned By Controlling Agency | SCREW MACHINE-FLAT 100 DEG HEAD CLOSE TOLERANCE SHORT THREAD OFFSET CRUCIFORM 160 KSI |
| AASU | Head Height | 0.215 INCHES NOMINAL |
| AAJD | Thread Class | 3A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
