| Part Number : NAS1304-50D | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5306-00-079-5459 (5306000795459) | |||
| Item Name : Bolt Shear | CAGE Code : 80205 | ||
| NIIN : 00-079-5459 (000795459) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15903 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: NAS130450D | |||
Thank you for taking an interest in part number NAS1304-50D, that of which is listed with the description Bolt Shear; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306000795459, part number NAS1304-50D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1304-50D | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5306-00-079-5459 (5306000795459) | |||
| Item Name : Bolt Shear | CAGE Code : 80205 | ||
| NIIN : 000795459 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number NAS1304-50D, that of which is listed with the description Bolt Shear; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306000795459, part number NAS1304-50D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-079-5459 Item PartTypeName: BOLT,SHEAR | 5306 | 000795459 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1304-50D | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.425 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 3.535 INCHES MINIMUM AND 3.565 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASL | HEAD DIAMETER | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.062 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.046 INCHES MINIMUM FIRST HOLE AND 0.056 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 3.115 INCHES MINIMUM AND 3.135 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON CORNERS |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.367 INCHES MINIMUM FIRST HOLE AND 3.377 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND PHOSPHATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1304 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
