| Part Number : MS200005H59 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5306-01-306-1549 (5306013061549) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 80205 | ||
| NIIN : 01-306-1549 (013061549) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS200005H59, that of which is listed with the description Bolt Internal Wrenching; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306013061549, part number MS200005H59 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS200005H59 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5306-01-306-1549 (5306013061549) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 80205 | ||
| NIIN : 013061549 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number MS200005H59, that of which is listed with the description Bolt Internal Wrenching; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306013061549, part number MS200005H59 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-306-1549 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 013061549 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS200005H59 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 4.235 INCHES MINIMUM AND 4.265 INCHES MAXIMUM |
| AASK | HEAD STYLE | BEVEL-CONICAL |
| AAUB | HOLE DIAMETER | 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.219 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL |
| AAJD | THREAD CLASS | 3A |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| ASXK | HOLE QUANTITY | 4 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.538 INCHES MINIMUM AND 0.588 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
