1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   National Aerospace Standards Com   //  NAS673V34H

NAS673V34H part number of National Aerospace Standards Com - Order Now!

Part Number : NAS673V34H Manufacturer : National Aerospace Standards Com
NSN : 5306-01-325-2743 (5306013252743)
Item Name : Bolt Close Tolerance CAGE Code : 80205
NIIN : 01-325-2743  (013252743)
FSC Code : 5306 Bolts
FSG Code : 53 Hardware and Abrasives
INC Code : 27851
NCB Code : 01 Country : USA

Thank you for taking an interest in part number NAS673V34H, that of which is listed with the description Bolt Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306013252743, part number NAS673V34H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS673V34H With Different Manufacturers

NAS673V34H

RFQ
Recently Viewed Parts
065072
Kraft Power Corporation
Connector,Rod End
NSN: 5340016967551
CAGE Code: 8P941
RFQ
R0116732-JP00
Denel Vehicle Systems
Seal Nonmetallic Special Shaped
NSN: 5330016140572
CAGE Code: SZ177
RFQ

Related NSN Components to NAS673V34H

NAS-501-3-5A
Zf Industrieantriebe Witten Gmbh
NSN: 5306-00-282-8544
CAGE Code: D9182 		NAS-1611-007
National Aerospace Standards Com
NSN: 5331-01-077-3147
CAGE Code: 80205
NAS 302 THRU 310
National Aerospace Standards Com
NSN: 4010-00-136-5764
CAGE Code: 80205 		NAS 1352-8-8P
National Aerospace Standards Com
NSN: 5305-00-978-9370
CAGE Code: 80205
NAS-3A5
National Aerospace Standards Com
NSN: 5306-00-282-4298
CAGE Code: 80205 		NAS 2803-12
National Aerospace Standards Com
NSN: 5305-01-530-9646
CAGE Code: 80205
NAS-1334C3C07F
Zf Industrieantriebe Witten Gmbh
NSN: 5315-01-018-5839
CAGE Code: D9182 		NAS 463
National Aerospace Standards Com
NSN: 5310-01-706-3209
CAGE Code: 80205
NAS-1612-08CP
National Instruments Corporation
NSN: 5330-01-245-1575
CAGE Code: 03950 		NAS 1611
National Aerospace Standards Com
NSN: 5330-01-053-3994
CAGE Code: 80205
NAS-1611-439
Federal Screw Products Inc
NSN: 5331-01-326-9281
CAGE Code: 73734 		NAS 537-3P024
National Aerospace Standards Com
NSN: 3120-01-184-6544
CAGE Code: 80205
NAS 1595-4
Zf Industrieantriebe Witten Gmbh
NSN: 5331-00-020-0203
CAGE Code: D9182 		NAS 1099-18
National Aerospace Standards Com
NSN: 5310-01-284-6395
CAGE Code: 80205
NAS 583-R6
National Aerospace Standards Com
NSN: 5305-01-446-7626
CAGE Code: 80205 		NAS 1613
National Aerospace Standards Com
NSN: 5331-01-367-2693
CAGE Code: 80205

Top nsn Manufacturers

1343080 alberta ltd 5dt inc
2709th af vehicle control group 3m medical imaging
3 m federal systems dept 360 tents l l c
1db metravib 43 apple hill llc
3m deutschland gmbh 3m france
3 com corporation 4 sure com inc
3m unitek corporation 3m co admininistrative electronic
3m italia spa

NAS673V34H part number of National Aerospace Standards Com - Order Now!

Part Number : NAS673V34H Manufacturer : National Aerospace Standards Com
NSN Number : 5306-01-325-2743 (5306013252743)
Item Name : Bolt Close Tolerance CAGE Code : 80205
NIIN : 013252743
FSC CODE : 5306 Bolts

Thank you for taking an interest in part number NAS673V34H, that of which is listed with the description Bolt Close Tolerance; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306013252743, part number NAS673V34H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS673V34H

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS673V34H with NSN 5306-01-325-2743, 5306013252743

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-01-325-2743

Item PartTypeName:

BOLT,CLOSE TOLERANCE

53060132527430N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS673V34H523

Characteristics Data of NSN 5306-01-325-2743, 5306013252743

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.338 INCHES NOMINAL
AASUHEAD HEIGHT0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
AAURGRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
AHYMNOMINAL THREAD DIAMETER0.190 INCHES
ANEEGRIP LENGTH2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM
ASXKHOLE QUANTITY3
BQDMHOLE TYPEDRILLED
CSYMSURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ZZZKSPECIFICATION/STANDARD DATA80205-NAS673 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MATTMATERIALTITANIUM ALLOY UNS R56400 OVERALL
CMLPTHREAD QUANTITY PER INCH32
CRHCHOLE CONFIGURATION STYLEHEXAGON CORNERS
AASKHEAD STYLEHEXAGON
AAUBHOLE DIAMETER0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
CSYMSURFACE FINISH63.0 MICROINCHES GRIP
THSDTHREAD SERIES DESIGNATORUNJF
AASBFASTENER LENGTH2.448 INCHES MINIMUM AND 2.478 INCHES MAXIMUM
Upload  

Frequently Asked Questions (FAQ): NAS673V34H NSN Part

What Type of Item Is Part Number NAS673V34H?
  • Part Number NAS673V34H is an "Bolt Close Tolerance" manufactured by National Aerospace Standards Com Managed with the NSN 5306-01-325-2743. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS673V34H?
  • Bolt Close Tolerance To receive a competitive quote for items with the part number NAS673V34H, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80205 Important When Purchasing Part Number NAS673V34H?
  • CAGE Code 80205 signifies National Aerospace Standards Com Managed as the manufacturer of Part Number NAS673V34H, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5306-01-325-2743 Paired with Part Number NAS673V34H?
  • Part Number NAS673V34H is the identification assigned to the item by National Aerospace Standards Com Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5306-01-325-2743 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up