| Part Number : NAS1105 51DW | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5306-01-614-1497 (5306016141497) | |||
| Item Name : Bolt Shear | CAGE Code : 80205 | ||
| NIIN : 01-614-1497 (016141497) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15903 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number NAS1105 51DW, that of which is listed with the description Bolt Shear; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306016141497, part number NAS1105 51DW is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1db metravib
CAGE Code: FAQ34 |
184th air refueling wing
CAGE Code: 3EP27 |
|
331 l tech productions llc
CAGE Code: 01XA0 |
43 apple hill llc
CAGE Code: 6AKU8 |
|
3 m federal systems dept
CAGE Code: 68352 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
5 11 inc
CAGE Code: 3YEL6 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
2101 llc
CAGE Code: 1GH76 |
|
5605 n illinois inc
CAGE Code: 089F4 |
3m france
CAGE Code: F0347 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
21st century enterprises inc
CAGE Code: 56589 |
|
3nity products llc
CAGE Code: 8HDM8 |
| Part Number : NAS1105 51DW | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5306-01-614-1497 (5306016141497) | |||
| Item Name : Bolt Shear | CAGE Code : 80205 | ||
| NIIN : 016141497 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number NAS1105 51DW, that of which is listed with the description Bolt Shear; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5306016141497, part number NAS1105 51DW is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3A |
| AATB | Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| MATT | Material | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| ANEE | Grip Length | 3.278 INCHES MINIMUM AND 3.298 INCHES MAXIMUM |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| AASA | Thread Length | 0.438 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| AAJF | Thread Direction | RIGHT-HAND |
| AASU | Head Height | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| CMLP | Thread Quantity Per Inch | 24 |
| AASB | Fastener Length | 3.922 INCHES MINIMUM AND 3.957 INCHES MAXIMUM |
| AASK | Head Style | DISHED HEXAGON |
| AHYM | Nominal Thread Diameter | 0.313 INCHES |
| MRC | Decoded Requirement | Clear Text Reply |
| STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
