| Part Number : NAS513-7 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5310-00-297-4085 (5310002974085) | |||
| Item Name : Washer Key | CAGE Code : 80205 | ||
| NIIN : 00-297-4085 (002974085) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01869 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: NAS5137 | |||
Thank you for taking an interest in part number NAS513-7, that of which is listed with the description Washer Key; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5310002974085, part number NAS513-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
17th st photo supply inc
CAGE Code: 1VV61 |
|
3d robotics llc
CAGE Code: 64TY6 |
101communications inc
CAGE Code: 1WS16 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
14 dock drive inc
CAGE Code: 14677 |
|
3m belgium nv
CAGE Code: B2281 |
2709th af vehicle control group
CAGE Code: 10994 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
3d safety services pty ltd
CAGE Code: Z2JB4 |
|
3d pep
CAGE Code: FB830 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
3d energy pty ltd
CAGE Code: Z0UA3 |
|
184th air refueling wing
CAGE Code: 3EP27 |
| Part Number : NAS513-7 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5310-00-297-4085 (5310002974085) | |||
| Item Name : Washer Key | CAGE Code : 80205 | ||
| NIIN : 002974085 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number NAS513-7, that of which is listed with the description Washer Key; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5310002974085, part number NAS513-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-297-4085 Item PartTypeName: WASHER,KEY | 5310 | 002974085 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS513-7 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.451 INCHES MINIMUM AND 0.467 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.630 INCHES MINIMUM AND 0.632 INCHES MAXIMUM |
| ABLK | INTERNAL PREBENT KEY WIDTH | 0.077 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.063 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM |
| CQFW | DISTANCE FROM KEY CENTER TO WIRE HOLE CENTER | 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| CRZZ | WIRE HOLE DIAMETER | 0.062 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1095 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7947,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | INTERNAL PREBENT KEY |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS513 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote