| Part Number : NAS509L10 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5310-00-576-8033 (5310005768033) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 80205 | ||
| NIIN : 00-576-8033 (005768033) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number NAS509L10, that of which is listed with the description Nut Plain Hexagon; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5310005768033, part number NAS509L10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS509L10 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5310-00-576-8033 (5310005768033) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 80205 | ||
| NIIN : 005768033 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number NAS509L10, that of which is listed with the description Nut Plain Hexagon; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5310005768033, part number NAS509L10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-576-8033 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 005768033 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS11170L10 | 1 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.046 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.986 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 109.0 DEGREES MINIMUM NUT AND 111.0 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CSXL | BEARING SURFACE FINISH | 250.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
