| Part Number : MS21069-06K | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5310-01-167-5514 (5310011675514) | |||
| Item Name : Nut Self Locking Plate | CAGE Code : 80205 | ||
| NIIN : 01-167-5514 (011675514) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 05280 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MS2106906K | |||
Thank you for taking an interest in part number MS21069-06K, that of which is listed with the description Nut Self Locking Plate; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5310011675514, part number MS21069-06K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS21069-06K | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5310-01-167-5514 (5310011675514) | |||
| Item Name : Nut Self Locking Plate | CAGE Code : 80205 | ||
| NIIN : 011675514 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number MS21069-06K, that of which is listed with the description Nut Self Locking Plate; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5310011675514, part number MS21069-06K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-167-5514 Item PartTypeName: NUT,SELF-LOCKING,PLATE | 5310 | 011675514 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21069-06K | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE |
| ACVN | NUT LENGTH | 0.661 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.171 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.195 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.218 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.435 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 450.0 DEG FAHRENHEIT MAXIMUM |
| BZRR | THREAD SERIES | UNJC |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
