| Part Number : MS90353U1207 | Manufacturer : National Aerospace Standards Com | ||
| NSN : 5320-01-266-4729 (5320012664729) | |||
| Item Name : Rivet Blind | CAGE Code : 80205 | ||
| NIIN : 01-266-4729 (012664729) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS90353U1207, that of which is listed with the description Rivet Blind; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5320012664729, part number MS90353U1207 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS90353U1207 | Manufacturer : National Aerospace Standards Com | ||
| NSN Number : 5320-01-266-4729 (5320012664729) | |||
| Item Name : Rivet Blind | CAGE Code : 80205 | ||
| NIIN : 012664729 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number MS90353U1207, that of which is listed with the description Rivet Blind; Manufactured by National Aerospace Standards Com and listed alongside the NSN 5320012664729, part number MS90353U1207 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-266-4729 Item PartTypeName: RIVET,BLIND | 5320 | 012664729 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS90353U1207 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.736 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| AAZF | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| AAZG | HEAD MAJOR DIAMETER | 0.762 INCHES NOMINAL |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ANEE | GRIP LENGTH | 0.406 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 112000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 326.0 KNOOP MINIMUM AND 466.0 KNOOP MAXIMUM SLEEVE |
| CQFM | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ALUMINUM SLEEVE |
| SFTT | SURFACE TREATMENT | CADMIUM OR ALUMINUM STEM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE STEM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
