| Part Number : HT359RNE4-7 | Manufacturer : National Instruments Corporation | ||
| NSN : 5305-01-337-6012 (5305013376012) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 03950 | ||
| NIIN : 01-337-6012 (013376012) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT359RNE47 | |||
Thank you for taking an interest in part number HT359RNE4-7, that of which is listed with the description Screw Close Tolerance; Manufactured by National Instruments Corporation and listed alongside the NSN 5305013376012, part number HT359RNE4-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT359RNE4-7 | Manufacturer : National Instruments Corporation | ||
| NSN Number : 5305-01-337-6012 (5305013376012) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 03950 | ||
| NIIN : 013376012 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT359RNE4-7, that of which is listed with the description Screw Close Tolerance; Manufactured by National Instruments Corporation and listed alongside the NSN 5305013376012, part number HT359RNE4-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-337-6012 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013376012 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT359RNE4-7 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.403 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.865 INCHES MINIMUM AND 0.872 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.475 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASU | HEAD HEIGHT | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CBBL | FEATURES PROVIDED | O RING |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR RING |
| SFTT | SURFACE TREATMENT | PHOSPHATE FASTENER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
