| Part Number : F628 | Manufacturer : Nautel Maine Inc | ||
| NSN : 3010-01-087-5123 (3010010875123) | |||
| Item Name : Gearcase Motor | CAGE Code : 57655 | ||
| NIIN : 01-087-5123 (010875123) | |||
| FSC Code : 3010 Torque Converters and Speed Changers | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 01102 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number F628, that of which is listed with the description Gearcase Motor; Manufactured by Nautel Maine Inc and listed alongside the NSN 3010010875123, part number F628 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : F628 | Manufacturer : Nautel Maine Inc | ||
| NSN Number : 3010-01-087-5123 (3010010875123) | |||
| Item Name : Gearcase Motor | CAGE Code : 57655 | ||
| NIIN : 010875123 | |||
| FSC CODE : 3010 Torque Converters and Speed Changers | |||
Thank you for taking an interest in part number F628, that of which is listed with the description Gearcase Motor; Manufactured by Nautel Maine Inc and listed alongside the NSN 3010010875123, part number F628 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-01-087-5123 Item PartTypeName: GEARCASE-MOTOR | 3010 | 010875123 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FLYM43710-16 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.375 INCHES |
| AAJU | OVERALL LENGTH | 3.688 INCHES |
| AAJV | OVERALL WIDTH | 1.375 INCHES |
| ABWV | SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | DC INPUT |
| AGAV | END ITEM IDENTIFICATION | NON-DIRECTIONAL BEACON (NDB) |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| ANTN | SPECIFIC USE | ANTENNA TIMING UNIT |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 25.0 INCH-OUNCES RUNNING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.688 INCHES SINGLE END |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 0.875 INCHES |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.312 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.180 SINGLE OUTPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 43.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| FEAT | SPECIAL FEATURES | B1,TI 6740.3,FA 9782/1,50 W ANTENNA TUNING UNIT,SEC 1-9,PG 8-1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
