| Part Number : 1412559-43 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 3020-00-053-3134 (3020000533134) | |||
| Item Name : Gear Spur | CAGE Code : 10001 | ||
| NIIN : 00-053-3134 (000533134) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 141255943 | |||
Thank you for taking an interest in part number 1412559-43, that of which is listed with the description Gear Spur; Manufactured by Navair And Navsea Managed and listed alongside the NSN 3020000533134, part number 1412559-43 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4m sigma corporation
CAGE Code: 0BC31 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
2mb international
CAGE Code: FA7N3 |
3m france
CAGE Code: F0347 |
|
3ps inc
CAGE Code: 1MHK2 |
3m purification inc
CAGE Code: 15472 |
|
3d energy pty ltd
CAGE Code: Z0UA3 |
3 ring inc
CAGE Code: 68310 |
|
4 ld inc
CAGE Code: 0ACW5 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
3s group inc
CAGE Code: 07CN0 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
5s components inc
CAGE Code: 1LNJ8 |
3m unitek corporation
CAGE Code: 90444 |
|
3 star papers limited
CAGE Code: 3DNS9 |
| Part Number : 1412559-43 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 3020-00-053-3134 (3020000533134) | |||
| Item Name : Gear Spur | CAGE Code : 10001 | ||
| NIIN : 000533134 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 1412559-43, that of which is listed with the description Gear Spur; Manufactured by Navair And Navsea Managed and listed alongside the NSN 3020000533134, part number 1412559-43 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 1.1934 INCHES MINIMUM AND 1.1944 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 43 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB, FIRST END |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.249 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.345 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.220 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.435 INCHES FIRST END |
| MATT | III MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
