| Part Number : 231670PC7 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 3040-00-273-1330 (3040002731330) | |||
| Item Name : Collar Shaft | CAGE Code : 10001 | ||
| NIIN : 00-273-1330 (002731330) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 13743 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 231670PC7, that of which is listed with the description Collar Shaft; Manufactured by Navair And Navsea Managed and listed alongside the NSN 3040002731330, part number 231670PC7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 231670PC7 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 3040-00-273-1330 (3040002731330) | |||
| Item Name : Collar Shaft | CAGE Code : 10001 | ||
| NIIN : 002731330 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 231670PC7, that of which is listed with the description Collar Shaft; Manufactured by Navair And Navsea Managed and listed alongside the NSN 3040002731330, part number 231670PC7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-273-1330 Item PartTypeName: COLLAR,SHAFT | 3040 | 002731330 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 231670PC7 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| ABNM | THICKNESS | 0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ABPH | SMALL END DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.4375 INCHES MINIMUM AND 0.4379 INCHES MAXIMUM |
| AEUZ | LARGEST DIAMETER LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AHYF | SECURING HOLE QUANTITY | 2 |
| AHYG | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 |
| CQKB | SECURING HOLE TYPE AND LOCATION | UNTHREADED SINGLE HOLE |
| CRZW | HOLE DIAMETER AND LOCATION | 0.0781 INCHES NOMINAL SINGLE HOLE |
| FEAT | SPECIAL FEATURES | FACE OF LARGE DIA END SLOTTED 0.10 IN. BY 0.12 IN. DEEP,THREAD BORE LG OF LARGE DIA END. 7/16-20 NF-3 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 2 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ROUND STEPPED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
