| Part Number : 2080658 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 3110-00-950-8071 (3110009508071) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 10001 | ||
| NIIN : 00-950-8071 (009508071) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 2080658, that of which is listed with the description Bearing Ball Annular; Manufactured by Navair And Navsea Managed and listed alongside the NSN 3110009508071, part number 2080658 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2080658 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 3110-00-950-8071 (3110009508071) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 10001 | ||
| NIIN : 009508071 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 2080658, that of which is listed with the description Bearing Ball Annular; Manufactured by Navair And Navsea Managed and listed alongside the NSN 3110009508071, part number 2080658 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-950-8071 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 009508071 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BUWEPSDWG2080658 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.3125 INCHES MINIMUM AND 0.3127 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.7480 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM |
| AGYC | CALIBRATION DESIGNATOR | C |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKVV | INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CTLH | OUTER RING TAPER | 0.0800 PER FOOT IN INCHES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
