| Part Number : 650269PC15 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5306-00-273-7407 (5306002737407) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 10001 | ||
| NIIN : 00-273-7407 (002737407) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 650269PC15, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5306002737407, part number 650269PC15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 650269PC15 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5306-00-273-7407 (5306002737407) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 10001 | ||
| NIIN : 002737407 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 650269PC15, that of which is listed with the description Bolt Internal Wrenching; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5306002737407, part number 650269PC15 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-273-7407 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 002737407 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FF-S-86 | 5 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.845 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.064 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 150000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
