| Part Number : 1368215PC1 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5315-00-024-8210 (5315000248210) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 00-024-8210 (000248210) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 1368215PC1, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315000248210, part number 1368215PC1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1368215PC1 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5315-00-024-8210 (5315000248210) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 000248210 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 1368215PC1, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315000248210, part number 1368215PC1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-024-8210 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 000248210 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1368215PC1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.815 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 0.938 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.064 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.046 INCHES NOMINAL |
| ABPF | SECOND UNDERCUT DIAMETER | 0.350 INCHES MINIMUM AND 0.352 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 0.562 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
| HGTH | HEIGHT | 0.093 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8640 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
