| Part Number : 611130 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5315-00-319-6543 (5315003196543) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 00-319-6543 (003196543) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 611130, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315003196543, part number 611130 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 611130 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5315-00-319-6543 (5315003196543) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 003196543 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 611130, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315003196543, part number 611130 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-319-6543 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 003196543 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 611130 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | RADIUS |
| AASK | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| ABMZ | DIAMETER | 0.375 INCHES MINIMUM AND 0.3754 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 1.146 INCHES MINIMUM AND 1.166 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.350 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 1.250 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| ABPF | SECOND UNDERCUT DIAMETER | 0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| ABRC | FIRST HOLE DIAMETER | 0.094 INCHES NOMINAL |
| ALWR | FIRST END CORNER RADIUS | 0.020 INCHES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES SHOULDER END |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES LONG END |
| FEAT | SPECIAL FEATURES | END OPPOSITE HEAD IS DRILLED 0.159 IN. DIA 0.750 IN. DEEP AND TAPPED 10-32 NF-2 0.300 IN. DEEP ON AXIAL C CTR LINE |
| HGTH | HEIGHT | 0.094 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
