| Part Number : 1091128 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5315-00-484-1210 (5315004841210) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 00-484-1210 (004841210) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 1091128, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315004841210, part number 1091128 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1091128 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5315-00-484-1210 (5315004841210) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 004841210 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 1091128, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315004841210, part number 1091128 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-484-1210 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 004841210 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1091128 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT CHAMFER |
| ABMZ | DIAMETER | 0.1869 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.1469 INCHES MINIMUM AND 0.1774 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 3.125 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.031 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 0.250 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
| HGTH | HEIGHT | 0.062 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
