| Part Number : 1878451 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5315-01-030-0516 (5315010300516) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 01-030-0516 (010300516) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 1878451, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315010300516, part number 1878451 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1878451 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5315-01-030-0516 (5315010300516) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 010300516 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 1878451, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315010300516, part number 1878451 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-030-0516 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 010300516 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1878451 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.744 INCHES MINIMUM AND 0.748 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 2.750 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.704 INCHES NOMINAL |
| ABPB | UNDER HEAD LENGTH | 2.750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABRD | SECOND HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.680 INCHES NOMINAL |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.680 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 1.250 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES LONG SHANK |
| FEAT | SPECIAL FEATURES | 4 GROOVES ALONG LG OF SHANK |
| HGTH | HEIGHT | 0.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 302 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
