| Part Number : 1532347 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5315-01-143-6793 (5315011436793) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 01-143-6793 (011436793) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 1532347, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315011436793, part number 1532347 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1532347 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5315-01-143-6793 (5315011436793) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 011436793 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 1532347, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315011436793, part number 1532347 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-143-6793 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 011436793 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1532347 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SQUARE |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.593 INCHES NOMINAL |
| ABPB | UNDER HEAD LENGTH | 1.078 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.062 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| CRRG | PIN HEAD DIAMETER | 0.750 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| FEAT | SPECIAL FEATURES | WITH 0.437 IN. MIN 0.442 IN. MAX DIA. 0.218 IN. MIN 0.228 IN. MAX DEEP DRILL HOLE PARALLEL TO CENTER LINE IN THE SQUARE ENDS INDENTATION 0.073 IN. MIN LG 0.078 IN. MAX LG 0.497 IN. MIN 0.499 MAX DIA LOCATED ON FIRST END |
| HGTH | HEIGHT | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 630 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1,TYPE2,OR TYPE3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
