| Part Number : 2146838 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5315-01-273-6920 (5315012736920) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 01-273-6920 (012736920) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 2146838, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315012736920, part number 2146838 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2146838 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5315-01-273-6920 (5315012736920) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 10001 | ||
| NIIN : 012736920 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 2146838, that of which is listed with the description Pin Grooved Headed; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5315012736920, part number 2146838 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-273-6920 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 012736920 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2146838 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.622 INCHES MINIMUM AND 0.623 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.593 INCHES NOMINAL |
| ABPB | UNDER HEAD LENGTH | 0.645 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.031 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| CRMG | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| CRRG | PIN HEAD DIAMETER | 0.735 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| FEAT | SPECIAL FEATURES | HEAD IS THREADED 10-24 NC 2B; 0.250 IN. DEEP |
| HGTH | HEIGHT | 0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 630 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1 OR 2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
