| Part Number : 2528191 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5340-01-594-5591 (5340015945591) | |||
| Item Name : Bracket Angle | CAGE Code : 10001 | ||
| NIIN : 01-594-5591 (015945591) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 2528191, that of which is listed with the description Bracket Angle; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5340015945591, part number 2528191 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2528191 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5340-01-594-5591 (5340015945591) | |||
| Item Name : Bracket Angle | CAGE Code : 10001 | ||
| NIIN : 015945591 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 2528191, that of which is listed with the description Bracket Angle; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5340015945591, part number 2528191 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-594-5591 Item PartTypeName: BRACKET,ANGLE | 5340 | 015945591 | P | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2528191 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.208 INCHES MINIMUM AND 1.228 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | INDEX DRIVE, 1020-00-938-1968 |
| AHLF | SECOND LEG WIDTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AHLH | SECOND LEG END WIDTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.653 INCHES MINIMUM AND 0.666 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.269 INCHES MINIMUM AND 0.289 INCHES MAXIMUM |
| AJFQ | SECOND LEG END RADIUS | 0.250 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | END RADIUS AND TAPERED |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 0.250 RADIANS NOMINAL |
| CWPG | SECOND LEG CHAMFER ANGLE | 57.0 DEGREES MINIMUM AND 63.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, SWITCH |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUK-A-8625 TYPE 2, CLASS 2 (BLACK) MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
