Part Number : 1549305 | Manufacturer : Navair And Navsea Managed | ||
NSN : 5340-01-594-8684 (5340015948684) | |||
Item Name : Clamp Loop | CAGE Code : 10001 | ||
NIIN : 01-594-8684 (015948684) | |||
FSC Code : 5340 Hardware Commercial | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 17532 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 1549305, that of which is listed with the description Clamp Loop; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5340015948684, part number 1549305 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 1549305 | Manufacturer : Navair And Navsea Managed | ||
NSN Number : 5340-01-594-8684 (5340015948684) | |||
Item Name : Clamp Loop | CAGE Code : 10001 | ||
NIIN : 015948684 | |||
FSC CODE : 5340 Hardware Commercial |
Thank you for taking an interest in part number 1549305, that of which is listed with the description Clamp Loop; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5340015948684, part number 1549305 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-594-8684 Item PartTypeName: CLAMP,LOOP | 5340 | 015948684 | P | A | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
A | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1549305 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | Overall Width | 0.750 INCHES NOMINAL |
CXCY | Part Name Assigned By Controlling Agency | CLAMP HALF, PIPE |
MRC | Decoded Requirement | Clear Text Reply |
AAUB | Hole Diameter | UNABLE TO DECODE |
ABHP | Overall Length | 6.437 INCHES NOMINAL |
STDC | Surface Treatment Document And Classification | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
MATT | Material | STEEL COMP 1020 OVERALL |
AKZC | Center To Center Distance Between First And Second Holes | 2.968 INCHES NOMINAL |
FEAT | Special Features | FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 48HR SALT SPRAY TEST |
SUPP | Supplementary Features | SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020 |
SPCL | Special Test Features | SPECIAL MARKINGS = STEEL STAMP 10001-1549305 IN 1/8 CHARACTERS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote