Part Number : 1549312 | Manufacturer : Navair And Navsea Managed | ||
NSN : 5340-01-594-8688 (5340015948688) | |||
Item Name : Clamp Loop | CAGE Code : 10001 | ||
NIIN : 01-594-8688 (015948688) | |||
FSC Code : 5340 Hardware Commercial | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 17532 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 1549312, that of which is listed with the description Clamp Loop; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5340015948688, part number 1549312 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 1549312 | Manufacturer : Navair And Navsea Managed | ||
NSN Number : 5340-01-594-8688 (5340015948688) | |||
Item Name : Clamp Loop | CAGE Code : 10001 | ||
NIIN : 015948688 | |||
FSC CODE : 5340 Hardware Commercial |
Thank you for taking an interest in part number 1549312, that of which is listed with the description Clamp Loop; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5340015948688, part number 1549312 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-594-8688 Item PartTypeName: CLAMP,LOOP | 5340 | 015948688 | P | A | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
A | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1549312 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | Overall Length | 2.875 INCHES NOMINAL |
CXCY | Part Name Assigned By Controlling Agency | CLAMP HALF, TUBE |
SPCL | Special Test Features | SPECIAL MARKING = STEEL STAMP 10001-1549312 IN 1/8 CHARACTERIST |
MRC | Decoded Requirement | Clear Text Reply |
AAUB | Hole Diameter | UNABLE TO DECODE |
MATT | Material | STEEL COMP 1020 OVERALL |
AKZC | Center To Center Distance Between First And Second Holes | 1.562 INCHES NOMINAL |
SFTT | Surface Treatment | PASSIVATE OVERALL |
FEAT | Special Features | APPLY PROTECTIVE COATING MIL-P-16232 TYPE M CLASS 1. FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 48 HR SALT SPRAY TEST |
ABMK | Overall Width | 0.500 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote