| Part Number : 1713629 | Manufacturer : Navair And Navsea Managed | ||
| NSN : 5905-00-778-7886 (5905007787886) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 10001 | ||
| NIIN : 00-778-7886 (007787886) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 1713629, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5905007787886, part number 1713629 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1713629 | Manufacturer : Navair And Navsea Managed | ||
| NSN Number : 5905-00-778-7886 (5905007787886) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 10001 | ||
| NIIN : 007787886 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 1713629, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Navair And Navsea Managed and listed alongside the NSN 5905007787886, part number 1713629 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-778-7886 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 007787886 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1713629 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.8750 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFK | MAXIMUM STARTING TORQUE | 1.90 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.20 INCH-OUNCES |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.006 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00150 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.667 KILOHMS SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.969 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
