| Part Number : 51773DA | Manufacturer : Navistar Intl Corp | ||
| NSN : 3020-00-424-7910 (3020004247910) | |||
| Item Name : Gear Helical | CAGE Code : 92679 | ||
| NIIN : 00-424-7910 (004247910) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 51773DA, that of which is listed with the description Gear Helical; Manufactured by Navistar Intl Corp and listed alongside the NSN 3020004247910, part number 51773DA is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 51773DA | Manufacturer : Navistar Intl Corp | ||
| NSN Number : 3020-00-424-7910 (3020004247910) | |||
| Item Name : Gear Helical | CAGE Code : 92679 | ||
| NIIN : 004247910 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 51773DA, that of which is listed with the description Gear Helical; Manufactured by Navistar Intl Corp and listed alongside the NSN 3020004247910, part number 51773DA is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-424-7910 Item PartTypeName: GEAR,HELICAL | 3020 | 004247910 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 51773DA | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| AGJS | PITCH DIAMETER | 3.5117 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 27 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.710 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 39.4500 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.751 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.127 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.440 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.250 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK ON FACE OF GEAR 40 DEG 40 MIN FROM KEYWAY,0.062 IN. BY 45 DEG CHAMFER ON TWO TEETH ON SIDE OPPOSITE TIMING MARK |
| MATT | MATERIAL | STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
