| Part Number : SR144UP1 | Manufacturer : New Hampshire Ball Bearings Inc | ||
| NSN : 3110-00-928-2343 (3110009282343) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 83086 | ||
| NIIN : 00-928-2343 (009282343) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number SR144UP1, that of which is listed with the description Bearing Ball Duplex; Manufactured by New Hampshire Ball Bearings Inc and listed alongside the NSN 3110009282343, part number SR144UP1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SR144UP1 | Manufacturer : New Hampshire Ball Bearings Inc | ||
| NSN Number : 3110-00-928-2343 (3110009282343) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 83086 | ||
| NIIN : 009282343 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number SR144UP1, that of which is listed with the description Bearing Ball Duplex; Manufactured by New Hampshire Ball Bearings Inc and listed alongside the NSN 3110009282343, part number SR144UP1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-928-2343 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 009282343 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 950543-7 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.1774 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1250 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | LUBRICATING OIL |
| AGYC | CALIBRATION DESIGNATOR | C |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| CTHQ | BEARING PRELOAD RATING | 0.5 POUNDS MINIMUM AND 1.5 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 14.0 DEGREES MINIMUM AND 19.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | PAIR OF BEARINGS,DUPLEX MOUNTED UNSHIELDED SIDES. MAX TORQUE 20.000 MG/MM UNDER 75 GM THRUST LOAD W/LUBRICATING OIL APPLIED. V MARK ON OF BEARING ASSY |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
