| Part Number : ABR4H-104 | Manufacturer : New Hampshire Ball Bearings Inc | ||
| NSN : 3110-01-053-9866 (3110010539866) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 50294 | ||
| NIIN : 01-053-9866 (010539866) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: ABR4H104 | |||
Thank you for taking an interest in part number ABR4H-104, that of which is listed with the description Bearing Ball Rod End; Manufactured by New Hampshire Ball Bearings Inc and listed alongside the NSN 3110010539866, part number ABR4H-104 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
17th st photo supply inc
CAGE Code: 1VV61 |
3d evolution ltd
CAGE Code: KD959 |
|
4 m company inc
CAGE Code: 1K407,57268 |
3d robotics llc
CAGE Code: 64TY6 |
|
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
3m telecom system group
CAGE Code: 0Y7Y1 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
3m norge a s
CAGE Code: N0447 |
|
21st century paramount inc
CAGE Code: 55428 |
3m purification pty limited
CAGE Code: Z5295 |
|
12 volt shop
CAGE Code: Z0JM2 |
3m company health care mfg
CAGE Code: 04515 |
|
3 v fastener co inc
CAGE Code: 1ER65 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
3 d mfg inc
CAGE Code: 66484 |
| Part Number : ABR4H-104 | Manufacturer : New Hampshire Ball Bearings Inc | ||
| NSN Number : 3110-01-053-9866 (3110010539866) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 50294 | ||
| NIIN : 010539866 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number ABR4H-104, that of which is listed with the description Bearing Ball Rod End; Manufactured by New Hampshire Ball Bearings Inc and listed alongside the NSN 3110010539866, part number ABR4H-104 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-053-9866 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 010539866 | T | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ABR4H-104 | 6 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW |
| ABHP | OVERALL LENGTH | 2.0940 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.6150 INCHES MINIMUM AND 1.6350 INCHES MAXIMUM |
| AGXJ | SHANK BORE DIAMETER | 0.5150 INCHES NOMINAL |
| AGXK | SHANK BORE DEPTH | 0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 80 PCT MIN FULL SPECIFIED LUBRICANT,SHANK FULL OF PUTTY 3119 FSCM 04622 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATT | MATERIAL | STEEL COMP 302 OR STEEL COMP 301 RETAINER |
| MATT | MATERIAL | STEEL COMP 4620 OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 4130 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5515 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-624 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
