| Part Number : SR40305PTK612-1 | Manufacturer : New Hampshire Ball Bearings Inc | ||
| NSN : 3110-01-183-5816 (3110011835816) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 83086 | ||
| NIIN : 01-183-5816 (011835816) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: SR40305PTK6121 | |||
Thank you for taking an interest in part number SR40305PTK612-1, that of which is listed with the description Bearing Ball Duplex; Manufactured by New Hampshire Ball Bearings Inc and listed alongside the NSN 3110011835816, part number SR40305PTK612-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
5 11 tactical inc
CAGE Code: 3P4J9 |
2 mb distribution
CAGE Code: FAH01 |
|
5s components inc
CAGE Code: 1LNJ8 |
1st team installations llc
CAGE Code: 3FSE9 |
|
3dbm co inc
CAGE Code: 31791,62874 |
31 mile equipment co
CAGE Code: 07PE3 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
3m medical imaging
CAGE Code: 0ZRE5 |
|
3m deutschland gmbh
CAGE Code: D2607 |
3m norge a s
CAGE Code: N0447 |
|
3 d machining inc
CAGE Code: 09SY7 |
3m purification inc
CAGE Code: 15472 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
4 star hose and supply inc
CAGE Code: 079J5 |
|
3m unitek corporation
CAGE Code: 90444 |
| Part Number : SR40305PTK612-1 | Manufacturer : New Hampshire Ball Bearings Inc | ||
| NSN Number : 3110-01-183-5816 (3110011835816) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 83086 | ||
| NIIN : 011835816 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number SR40305PTK612-1, that of which is listed with the description Bearing Ball Duplex; Manufactured by New Hampshire Ball Bearings Inc and listed alongside the NSN 3110011835816, part number SR40305PTK612-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-183-5816 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011835816 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13084577 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 1.0000 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.7500 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.5650 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYK | SHIELD QUANTITY | 1 |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | 7.0 POUNDS MINIMUM AND 8.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 20.0 DEGREES NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIS-30520,FSCM 83086 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SHIELD |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL COMP 440C SNAP RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SNAP RING OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SNAP RING |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
