| Part Number : H975SSW2SS-M | Manufacturer : Nielsen Hardware Corporation | ||
| NSN : 5340-01-563-6257 (5340015636257) | |||
| Item Name : Handle Bail | CAGE Code : 98003 | ||
| NIIN : 01-563-6257 (015636257) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20353 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: H975SSW2SSM | |||
Thank you for taking an interest in part number H975SSW2SS-M, that of which is listed with the description Handle Bail; Manufactured by Nielsen Hardware Corporation and listed alongside the NSN 5340015636257, part number H975SSW2SS-M is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : H975SSW2SS-M | Manufacturer : Nielsen Hardware Corporation | ||
| NSN Number : 5340-01-563-6257 (5340015636257) | |||
| Item Name : Handle Bail | CAGE Code : 98003 | ||
| NIIN : 015636257 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number H975SSW2SS-M, that of which is listed with the description Handle Bail; Manufactured by Nielsen Hardware Corporation and listed alongside the NSN 5340015636257, part number H975SSW2SS-M is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-563-6257 Item PartTypeName: HANDLE,BAIL | 5340 | 015636257 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H975SSW2SS-M | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | MATERIAL | STEEL CORROSION RESISTING HANDLE |
| ACVU | STOCK DIAMETER | 0.310 INCHES NOMINAL |
| SR-1 | MANUFACTURERS CODE | 98003 |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | H975SSW2SS |
| AGNQ | PLATE LENGTH | 4.750 INCHES NOMINAL |
| ALMQ | MOUNTING PLATE STYLE | RECTANGULAR |
| AXGY | MOUNTING METHOD | MOUNTING PLATE |
| ALMZ | HANDLE CLEARANCE | 2.750 INCHES NOMINAL |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AAUB | HOLE DIAMETER | 0.199 INCHES NOMINAL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY)LIFTING GRAPPLE, 180 DEGREE, HEAVY DUTY |
| FEAT | SPECIAL FEATURES | BAIL HANDLE ALTERED STYLE IN THAT INSTEAD OF BEING ROUNDED IT IS PENTAGON SHAPED, USING POINTED END FOR EITHER TIE DOWN OR HOIST LIFTING; HAS HEAVY DUTY STAINLESS STEEL RETURN SPRING, WITH 180 DEGREE MOTION; MOUNTING PLATE IS IRREGULARLY SHAPED IN THAT UPPER PORTION IS SMALLER IN WIDTH, 3.830 FOR A LENGTH COVERING THE HANDLE; AND THE LOWER PORTION OF THE PLATE IS FOR UNDER THE HANDLE TO THE END OF THE PLATE; UPPER PORTION HAS TWO MOUNTING HOLES CENTERED 3.000 INCHES APART AND 0.415 INCHES FROM OUTSIDE EDGES; BOTTOM PORTION HAS 3 MOUNTING HOLES SPACED 1.500 INCHES APART AND 0.875 INCHES FROM OUTSIDE EDGE |
| STYL | STYLE DESIGNATOR | D |
| ADEC | PLATE WIDTH | 2.750 INCHES NOMINAL |
| ADJU | INSIDE LENGTH | 4.130 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
