| Part Number : 10115501 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN : 5305-01-165-2461 (5305011652461) | |||
| Item Name : Screw Close Tolerance | CAGE Code : A486G | ||
| NIIN : 01-165-2461 (011652461) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 10115501, that of which is listed with the description Screw Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5305011652461, part number 10115501 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10115501 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN Number : 5305-01-165-2461 (5305011652461) | |||
| Item Name : Screw Close Tolerance | CAGE Code : A486G | ||
| NIIN : 011652461 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 10115501, that of which is listed with the description Screw Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5305011652461, part number 10115501 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-165-2461 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011652461 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LB35-4-16 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.391 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
