| Part Number : 10113541 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN : 5305-01-207-7550 (5305012077550) | |||
| Item Name : Screw Close Tolerance | CAGE Code : A486G | ||
| NIIN : 01-207-7550 (012077550) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 10113541, that of which is listed with the description Screw Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5305012077550, part number 10113541 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10113541 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN Number : 5305-01-207-7550 (5305012077550) | |||
| Item Name : Screw Close Tolerance | CAGE Code : A486G | ||
| NIIN : 012077550 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 10113541, that of which is listed with the description Screw Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5305012077550, part number 10113541 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-207-7550 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 012077550 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4069-3-3A | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.013 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT,HORNET F/A-18 (E/F);AIRCRAFT,EAGLE F-15;AIRCRAFT,HARRIER AV-8B |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 101.0 DEGREES NOMINAL |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23-118,INCO 718 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488,TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
