| Part Number : 10167833 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN : 5305-01-473-8309 (5305014738309) | |||
| Item Name : Screw Close Tolerance | CAGE Code : A486G | ||
| NIIN : 01-473-8309 (014738309) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 10167833, that of which is listed with the description Screw Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5305014738309, part number 10167833 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10167833 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN Number : 5305-01-473-8309 (5305014738309) | |||
| Item Name : Screw Close Tolerance | CAGE Code : A486G | ||
| NIIN : 014738309 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 10167833, that of which is listed with the description Screw Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5305014738309, part number 10167833 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-473-8309 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014738309 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HP1262C3-3-5 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASA | THREAD LENGTH | 0.312 INCHES NOMINAL |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.293 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ANEE | GRIP LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
