| Part Number : 10116145 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN : 5306-01-199-1262 (5306011991262) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : A486G | ||
| NIIN : 01-199-1262 (011991262) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 10116145, that of which is listed with the description Bolt Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5306011991262, part number 10116145 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10116145 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
| NSN Number : 5306-01-199-1262 (5306011991262) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : A486G | ||
| NIIN : 011991262 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 10116145, that of which is listed with the description Bolt Close Tolerance; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5306011991262, part number 10116145 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-199-1262 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 011991262 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 81921-10-15 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.886 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.833 INCHES MINIMUM AND 1.880 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.350 INCHES NOMINAL |
| AATB | WIDTH BETWEEN FLATS | 0.970 INCHES MINIMUM AND 0.978 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.146 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ANEE | GRIP LENGTH | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 145000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.579 INCHES MINIMUM FIRST HOLE AND 1.636 INCHES MAXIMUM FIRST HOLE |
| FEAT | SPECIAL FEATURES | TWO HOLES 90 DEGREES APART |
| MATT | MATERIAL | COBALT COMP MP-35-N OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
