Part Number : 10317580 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
NSN : 5310-01-520-5732 (5310015205732) | |||
Item Name : Washer Flat | CAGE Code : A486G | ||
NIIN : 01-520-5732 (015205732) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 13393 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 10317580, that of which is listed with the description Washer Flat; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5310015205732, part number 10317580 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 10317580 | Manufacturer : Nimikkeistokeskus Ncb Finland | ||
NSN Number : 5310-01-520-5732 (5310015205732) | |||
Item Name : Washer Flat | CAGE Code : A486G | ||
NIIN : 015205732 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 10317580, that of which is listed with the description Washer Flat; Manufactured by Nimikkeistokeskus Ncb Finland and listed alongside the NSN 5310015205732, part number 10317580 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-01-520-5732 Item PartTypeName: WASHER,FLAT | 5310 | 015205732 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
ST4M146-6V | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGR | Cross-Sectional Shape Style | RECTANGULAR |
ABMW | Peripheral Shape Style | ROUND |
FEAT | Special Features | THESE WASHERS ARE TO BE USED WITH PIN AND COLLAR FASTNERS AND BLIND BOLTS WHERE STRUCTURE CANNOT BE CHAMFERED TO ACCEPT HEAD TO SHANK FILLETS.APPLICABLE PROCESS SPECS WILL AUTHORIZE THEIR USE |
ABMX | Center Hole Shape Style | ROUND |
MRC | Decoded Requirement | Clear Text Reply |
ABNM | Thickness | 0.020 INCHES NOMINAL |
ADAV | Overall Diameter | 0.315 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
AAUB | Hole Diameter | 0.224 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
MATT | Material | TITANIUM ALLOY OVERALL |
AGAV | End Item Identification | F18 E/F |
CRTL | Criticality Code Justification | AGAV |
MDCL | Material Document And Classification | MIL-T-9046,TYPE III,COMPOSITION C,CONDITION ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote