| Part Number : DA6157 | Manufacturer : Norfolk Naval Shipyard | ||
| NSN : 3020-00-251-0879 (3020002510879) | |||
| Item Name : Gear Helical | CAGE Code : 81601 | ||
| NIIN : 00-251-0879 (002510879) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number DA6157, that of which is listed with the description Gear Helical; Manufactured by Norfolk Naval Shipyard and listed alongside the NSN 3020002510879, part number DA6157 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : DA6157 | Manufacturer : Norfolk Naval Shipyard | ||
| NSN Number : 3020-00-251-0879 (3020002510879) | |||
| Item Name : Gear Helical | CAGE Code : 81601 | ||
| NIIN : 002510879 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number DA6157, that of which is listed with the description Gear Helical; Manufactured by Norfolk Naval Shipyard and listed alongside the NSN 3020002510879, part number DA6157 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-251-0879 Item PartTypeName: GEAR,HELICAL | 3020 | 002510879 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| DA6157 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 3.3622 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 30 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 21.0 ROCKWELL C MINIMUM OVERALL AND 25.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.5622 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.359 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 26.8333 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.140 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.219 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.999 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.312 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.166 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.875 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK AT CENTER LINE OF TOOTH SPACED 42 DEG 14 MIN FROM CENTER LINE OF KEYWAY,2 PULLER HOLES 3/8-16 UNC 2B THD,9/16 IN. DEEP ON 2-9/16 IN. DIA BOLT CIRCLE |
| MATT | MATERIAL | STEEL COMP 1137 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 1137 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
