| Part Number : 505-0002 | Manufacturer : Norma Pennsylvania Inc | ||
| NSN : 6680-00-221-1051 (6680002211051) | |||
| Item Name : Shaft Assembly Flex | CAGE Code : 7Z588 | ||
| NIIN : 00-221-1051 (002211051) | |||
| FSC Code : 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments | |||
| FSG Code : 66 Instruments and Laboratory Equipment | |||
| INC Code : 20315 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 5050002 | |||
Thank you for taking an interest in part number 505-0002, that of which is listed with the description Shaft Assembly Flex; Manufactured by Norma Pennsylvania Inc and listed alongside the NSN 6680002211051, part number 505-0002 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m co engineering document systems
CAGE Code: 1BY21 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
3m purification inc
CAGE Code: 15472 |
2kr systems llc
CAGE Code: 730Z2 |
|
3m espana sa
CAGE Code: 0211B,H7034 |
2eme regiment du materiel
CAGE Code: FARD5 |
|
3m company communication markets
CAGE Code: 0VGY3 |
4 m company inc
CAGE Code: 1K407,57268 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
3d evolution ltd
CAGE Code: KD959 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
20th century spring mfg
CAGE Code: 0PZE8 |
|
3m unitek corporation
CAGE Code: 90444 |
4 seasons counting systems inc
CAGE Code: 0MHX5 |
|
3 d mfg inc
CAGE Code: 66484 |
| Part Number : 505-0002 | Manufacturer : Norma Pennsylvania Inc | ||
| NSN Number : 6680-00-221-1051 (6680002211051) | |||
| Item Name : Shaft Assembly Flex | CAGE Code : 7Z588 | ||
| NIIN : 002211051 | |||
| FSC CODE : 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments | |||
Thank you for taking an interest in part number 505-0002, that of which is listed with the description Shaft Assembly Flex; Manufactured by Norma Pennsylvania Inc and listed alongside the NSN 6680002211051, part number 505-0002 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | End Item Identification | 6115-00-116-2217 GENERATOR SET,DIESEL |
| MRC | Decoded Requirement | Clear Text Reply |
| BJPS | Casing Material | STEEL |
| AASA | Thread Length | 0.438 INCHES NOMINAL BOTH ENDS |
| FEAT | Special Features | INPUT END TYPE SAE MARINE FITTING;OUTPUT END TYPE SAE TACH HEAVY FITTING;FERRULE AND COUPLING NUTS MATERIAL BRASS |
| APTD | End Type | ROUND KEYED FIRST END |
| BDRL | Setscrew | NOT INCLUDED FIRST END |
| BPPL | Wrenching Facility Type | HEXAGON BOTH ENDS |
| AEDN | Tip Length | 0.688 INCHES NOMINAL FIRST END |
| AAJF | Thread Direction | RIGHT-HAND BOTH ENDS |
| CFQW | Cross Section Size And Location | 0.183 INCHES MINIMUM DIAMETER FIRST END AND 0.188 INCHES MAXIMUM DIAMETER FIRST END |
| CFRQ | Casing Outside Diameter | 0.440 INCHES NOMINAL |
| CFRT | Swivel End | PROVIDED BOTH ENDS |
| CFRZ | Core Overall Length | 6.000 INCHES NOMINAL |
| CGDN | Minimum Operating Radius | 4.000 INCHES |
| AHHF | Tongue Thickness | 0.054 INCHES MINIMUM FIRST END AND 0.063 INCHES MAXIMUM FIRST END |
| CFRN | Casing Surface Treatment | GALVANIZED |
| CFRP | Casing Length Between Ferrules | 6.000 INCHES NOMINAL |
| CFRW | End Overall Diameter | 1.000 INCHES NOMINAL BOTH ENDS |
| CFRY | Lubrication Fitting | NOT PROVIDED BOTH ENDS |
| CFRR | Casing Protective Device Type | COILED SPRING PROTECTOR |
| CFSB | Core Rotation Direction | CLOCKWISE OR COUNTERCLOCKWISE |
| AJXJ | Core Material | STEEL, CARBON |
| AJYP | Screw Thread Series Designator | UNS BOTH ENDS |
| APJC | Thread Location | INTERNAL BOTH ENDS |
| AKMH | Core Diameter | 0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AWZY | End Connection Type | THREADED INTERNAL BOTH ENDS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
