| Part Number : 134CM10140-9 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 3110-00-180-7672 (3110001807672) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 26512 | ||
| NIIN : 00-180-7672 (001807672) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 134CM101409 | |||
Thank you for taking an interest in part number 134CM10140-9, that of which is listed with the description Bearing Ball Rod End; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 3110001807672, part number 134CM10140-9 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1db metravib
CAGE Code: FAQ34 |
4 r electro systems
CAGE Code: 1T600 |
|
3gen grup trafik ltd
CAGE Code: TB427 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
3m purification pty limited
CAGE Code: Z5295 |
2mb international
CAGE Code: FA7N3 |
|
3 d machining inc
CAGE Code: 09SY7 |
498 msug
CAGE Code: 5VW08 |
|
1 source electronics inc
CAGE Code: 551K1 |
3m belgium nv
CAGE Code: B2281 |
|
14 dock drive inc
CAGE Code: 14677 |
3m unitek corporation
CAGE Code: 90444 |
|
3 com/us robotics
CAGE Code: 1B8Q7 |
20th century fiberglass
CAGE Code: 80241 |
|
3m health care ltd
CAGE Code: U5989 |
| Part Number : 134CM10140-9 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 3110-00-180-7672 (3110001807672) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 26512 | ||
| NIIN : 001807672 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 134CM10140-9, that of which is listed with the description Bearing Ball Rod End; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 3110001807672, part number 134CM10140-9 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-180-7672 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 001807672 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 134CM10140-9 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.3720 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM |
| AAZF | SHANK STYLE | SOLID |
| ABHP | OVERALL LENGTH | 2.3430 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.0620 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | 8.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 ROD END BODY |
| MATT | MATERIAL | PLASTIC TETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | ANODIZE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
