| Part Number : 2-74198-1 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 3110-00-726-1901 (3110007261901) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 76823 | ||
| NIIN : 00-726-1901 (007261901) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 2741981 | |||
Thank you for taking an interest in part number 2-74198-1, that of which is listed with the description Bearing Ball Rod End; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 3110007261901, part number 2-74198-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
21st century optics inc
CAGE Code: 0TN38 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
1st team installations llc
CAGE Code: 3FSE9 |
4 sure com inc
CAGE Code: 1LDH8 |
|
320 matlogpel breda centrale
CAGE Code: H2851 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
2m machining and manufacturing
CAGE Code: 6Y604 |
3 com/us robotics
CAGE Code: 1B8Q7 |
|
14 dock drive inc
CAGE Code: 14677 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
3 vets inc
CAGE Code: 1MK20 |
20 10 products inc
CAGE Code: 09KC9 |
|
2709th af vehicle control group
CAGE Code: 10994 |
3 d machining inc
CAGE Code: 09SY7 |
|
3m quante ag telekommunikation
CAGE Code: D2771 |
| Part Number : 2-74198-1 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 3110-00-726-1901 (3110007261901) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 76823 | ||
| NIIN : 007261901 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 2-74198-1, that of which is listed with the description Bearing Ball Rod End; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 3110007261901, part number 2-74198-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-726-1901 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 007261901 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2-74198-1 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3125 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 0.9062 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4380 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.5620 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.4700 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| FEAT | SPECIAL FEATURES | SHANK END CHAMFERED,SEALS RETAINED BY SNAP WASHERS,0.0620 IN. W BY 0.0530 IN. DP KEYWAY IN SHANK |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.8600 INCHES NOMINAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
