| Part Number : 128ABM10100-7 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5305-01-064-3595 (5305010643595) | |||
| Item Name : Thumbscrew | CAGE Code : 26512 | ||
| NIIN : 01-064-3595 (010643595) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06673 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 128ABM101007 | |||
Thank you for taking an interest in part number 128ABM10100-7, that of which is listed with the description Thumbscrew; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305010643595, part number 128ABM10100-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 128ABM10100-7 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5305-01-064-3595 (5305010643595) | |||
| Item Name : Thumbscrew | CAGE Code : 26512 | ||
| NIIN : 010643595 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 128ABM10100-7, that of which is listed with the description Thumbscrew; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305010643595, part number 128ABM10100-7 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-064-3595 Item PartTypeName: THUMBSCREW | 5305 | 010643595 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 128ABM10100-7 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.531 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.375 INCHES NOMINAL |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| AASL | HEAD DIAMETER | 0.625 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.375 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.063 INCHES NOMINAL |
| AAUY | POINT LENGTH | 0.782 INCHES NOMINAL |
| AAVA | POINT DIAMETER | 0.247 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| FEAT | SPECIAL FEATURES | HOLE IN SHANK 0.133 IN. DIA,1.187 IN. FROM BEARING SURFACE OF HEAD TO CENTER OF HOLE |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
