| Part Number : GB510N4A4 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5305-01-084-8275 (5305010848275) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 01-084-8275 (010848275) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number GB510N4A4, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305010848275, part number GB510N4A4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GB510N4A4 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5305-01-084-8275 (5305010848275) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 010848275 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number GB510N4A4, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305010848275, part number GB510N4A4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-084-8275 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010848275 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BM19045-4A4 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.267 INCHES MINIMUM AND 0.334 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.527 INCHES MINIMUM AND 0.574 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OVERALL OR MIL-C-8837,TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 26512-GB510N MANUFACTURERS SPECIFICATION CONTROL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
