| Part Number : GB510CE | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5305-01-118-7430 (5305011187430) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 01-118-7430 (011187430) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number GB510CE, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305011187430, part number GB510CE is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GB510CE | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5305-01-118-7430 (5305011187430) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 011187430 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number GB510CE, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305011187430, part number GB510CE is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-118-7430 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011187430 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H148-5-38 | 5 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.454 INCHES MINIMUM AND 0.521 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.839 INCHES MINIMUM AND 2.886 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.573 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD 1ST TREATMENT RESPONSE OVERALL OR MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
